Your basket is empty »


Rods & Mortar is a system that can be used for virtually any type of glass block project. It can be used internally, externally for straight & curved panels. Simply Glass Blocks offers a complete guide to installing Glass Blocks using the Rods and Mortar system, you can download a comprehensive datasheet in Adobe Acrobat PDF format in the adjacent panel. This contains full installation guide, accessories available.

For quotes using the rods & mortar system for straight panels/walls click here.

To obtain quotations for curved panels click here.


 

 





Download & Print PDF documents here.

http://www.adobe.com Adobe Acrobat rods & mortar datasheet 1 Adobe Acrobat rods & mortar datasheet 2

GLASS BLOCK MORTAR
Colmef Vetromix glass block mortar when constructing brick by brick. By slightly diluting the mix it can be used as a grout for finishing.

EXPANSION FOAM
Expansion and contraction
is one of the most critical
aspects of any glass block
construction. Incorporate to perimeter off panel.

 

BITUMEN EXPANSION FOAM
Expansion and contraction
is one of the most critical
aspects of any glass block
construction. Use bitumen on cill / base of panel.

REINFORCEMENT
Stainless steel ribbed
reinforcement rods are used to anchor glass block panels in place and increase integral strength.


SPACER PEGS
10mm spacer pegs are
available to assist with
accuracy of construction and prevent mortar squeeze. For horizontal and verticle joints.

WHITE SILICONE
Silicone is used to weatherproof perimeter expansion material and avoid bridging of mortar.

 

 

HOME | BLOCK RANGE | INSTALL METHODS | GALLERY | SHOWER SCREEENS | ONLINE SHOP | SITE MAP | AREAS | LINKS | CONTACT US
TERMS & CONDITIONS | WEBSITE DESIGNED MAINTAINED AND OPTIMISED BY CONTACT MEDIA